How to use and maintain truck refrigerators

Installation location: The installation location should be determined according to the actual layout of the truck, mainly considering how to integrate the refrigerator with the interior of the truck to make the installation more beautiful, practical and convenient; but no matter where it is installed, it is required to reserve a certain space and open heat dissipation holes to dissipate the heat generated when the refrigerator is working.
Check the sealing: Check the sealing of the refrigerator seal strip frequently. The deformation of the seal strip will affect the tightness of the closure, causing the cold air to leak out, thereby increasing power consumption. Severe deformation should be repaired and replaced in time.
Reduce the number of door openings: Every time the door is opened, the cold air is exposed and the hot air invades, and the compressor has to be run again for refrigeration. Therefore, try to take out the required multiple ingredients at one time, move quickly, and do not open the door too many times to reduce the loss of cold air.
Don't leave it empty: If there is no inventory, the truck refrigerator should not be empty, which will consume a lot of electricity. A better way is to put a few small bottles of water in and let it freeze or refrigerate, which can help keep the temperature low and reduce energy consumption.
Remove odors: Lemon deodorization: Cut the lemon into small pieces and put it on each layer of the refrigerator to remove odors. Charcoal deodorization: Grind an appropriate amount of charcoal, put it in a small cloth bag, and put it in the refrigerator. The deodorizing effect is very good; you can also put 500 grams of baking soda into two empty bottles, and then put them on the upper and lower layers of the refrigerator respectively; after 24 hours, all kinds of odors in the refrigerator can be removed.
Notes
1. Please always ensure that the refrigerator vents and heat dissipation holes are unobstructed, and keep the refrigerator away from heat sources when using it;
2. When cleaning the refrigerator, please turn off all power supplies and do not use strong detergents to clean the refrigerator.
3. The higher the ambient temperature of the refrigerator, the greater the power consumption;
4. The more items stored in the refrigerator, the more power the refrigerator needs to consume to maintain the set temperature;
5. The more times the door is opened and closed, the greater the power consumption of the refrigerator;
6. The lower the set temperature of the refrigerator, the greater the relative power consumption;
7. The larger the battery capacity, the longer the use time; the more sufficient the power, the longer the use time.
Maintenance method
1. When cleaning the inside of the refrigerator, do not scratch the inner wall with sharp objects, and try to avoid hard objects hitting the inner wall;
2. Do not wipe the inside of the box with non-volatile or corrosive liquids;
3. Please use a soft cloth and neutral detergent (water or refrigerator-specific detergent) to wipe;
4. Do not rinse or soak the refrigerator in water to clean it.